Step 1:

Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that may prevent the sticker from adhering well.

 

 

Step 2:

Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

 

 

Step 3:

Carefully peel the blue paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

 

 

Step 4:

Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card.

 

 

Step 5:

Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.

 

 

 

*Use a pin to poke any air bubbles in the center and push the air out through the hole.

*For best results do not apply a sticker in extreme hot or cold temperatures.